How to Select a PCB Substrate for Automotive Radar? An Analysis of the Performance Advantages of Hydrocarbon Resins


Release time:2025-10-21


A high-performance hydrocarbon resin specifically developed for high-frequency applications is emerging as an ideal choice for automotive radar PCB substrates. The material’s key advantage lies in its exceptional performance, making it particularly well-suited for millimeter-wave signals.

As advanced driver-assistance systems (ADAS) evolve toward full self-driving (FSD), vehicles have become intelligent terminals integrating a multitude of high-precision sensors. Among these, millimeter-wave radar operating in the 24 GHz and 77 GHz bands has emerged as a core technology for achieving accurate environmental perception, thanks to its outstanding performance across all weather conditions and throughout the entire time domain. The radar’s overall performance—particularly its detection range, resolution, and angular accuracy—depends largely on the design of its antenna and RF front-end circuitry. At the heart of it all lies the automotive radar PCB substrate, a seemingly ordinary yet critically important component.

Signals in the millimeter-wave frequency band have extremely short wavelengths, making them highly sensitive to the characteristics of the transmission medium. At millimeter-wave frequencies, even minor material defects or variations in performance are significantly amplified, leading to a sharp degradation in radar performance. Conventional PCB substrate materials face two major challenges at these frequencies: first, excessively high dielectric loss severely attenuates signal energy, directly reducing the radar’s effective detection range; second, an unstable dielectric constant—particularly prone to drift under varying temperature and humidity conditions—can cause phase mismatches in antenna arrays, compromising beam‑forming accuracy and ultimately introducing errors in target‑angle estimation.

 Hydrocarbon resin

Against this backdrop, high-performance hydrocarbon resins specifically engineered for high-frequency applications are emerging as the ideal choice for automotive radar PCB substrates. The core advantage of these materials lies in their exceptional performance, particularly well-suited to millimeter-wave signals. First and foremost, their ultra‑high‑purity nonpolar molecular structure delivers an industry‑leading low dielectric loss tangent (Df), effectively minimizing energy attenuation—i.e., insertion loss—during millimeter-wave signal transmission through the substrate. For radar systems, lower losses translate directly into a higher signal‑to‑noise ratio, enabling clearer detection of distant, fainter targets and rendering sharper target signatures.

Secondly, this high‑frequency, high‑speed hydrocarbon resin exhibits exceptional dielectric constant (Dk) stability. Whether exposed to the high‑temperature environment near the engine compartment or to humid conditions during rain and snow, its extremely low moisture absorption—below 0.05%—and high glass transition temperature—exceeding 180°C—ensure that the Dk value remains highly consistent. This stability is critical for phased‑array radars, enabling precise control of the signal phase at each antenna element, thereby achieving accurate beam scanning and target localization and providing reliable data to support vehicle safety decisions.

Furthermore, automotive applications demand exceptionally high reliability. Thanks to advanced interface‑treatment technologies, the hydrocarbon‑resin substrate achieves robust adhesion to copper foil (peel strength > 8 lb/in), readily withstanding prolonged vibration on rough road surfaces and repeated thermal cycling. This effectively prevents radar malfunctions caused by delamination or circuit breakage.
Therefore, selecting automotive radar PCB substrates centered on high‑performance hydrocarbon resins is not merely a matter of cost; it also serves as a fundamental safeguard for the “safety first” principle in autonomous driving. By providing an ultra‑low‑loss, highly stable operating platform for the radar’s “keen eye,” this technology directly enhances a vehicle’s environmental perception capabilities, making it a key material innovation that drives the advancement of automotive intelligence and safety.

High-frequency, high-speed hydrocarbon resin,High-performance hydrocarbon resin,Hydrocarbon resin

中企跨境-全域组件 1.82 制作前进入CSS配置样式

Email:

Telephone:

页面顺滑的滚动

右侧在线客服样式 1,2,3 1

图片alt标题设置: Wuhan Desytek Environmental New Materials Co., Ltd.

表单验证提示文本: Content cannot be empty!

循环体没有内容时: Sorry, no matching items were found.

CSS / JS 文件放置地